Pepa PTFE me ke kākoʻo lole aniani

Raw Materials: Daikin PTFE resin (Iapana) e like me ka ili mea, me ka aniani puluniu lole e like me ke kākoʻo (monofilament anawaena emi ma mua o like me 9μm). Hana ʻia ka ʻili fiber e hoʻonui i ka pilina me PTFE.
Kaʻina Hana: Hoʻohana ʻo RANA i ke kaʻina hana "gradient hot{0}}press" i hoʻomohala kūʻokoʻa (e hoʻonui mālie ʻia ka mahana mai 200 degere a 360 degere), e ʻae ana i nā kaulahao molekala resin PTFE e hoʻopuehu piha i loko o nā āwaha aniani, e hana ana i kahi "lāʻau-aʻa-like" heleuma (ka ikaika like me 5N/cm).
Core: ʻO ka hui pū ʻana o ka modulus kiʻekiʻe o ke aniani fiber (72GPa) a me ka coefficient friction haʻahaʻa o PTFE (0.04) e hāʻawi i ka Pepa lining me ke kūpaʻa ʻaʻahu ʻelua (ʻaʻahu ʻaʻahu liʻiliʻi ma mua a i ʻole like me 0.001g/cm²) a me nā hiʻohiʻona hoʻohaʻahaʻa friction, e hoʻolōʻihi i ke ola lawelawe o nā lako.

Pōmaikaʻi: Hoʻāʻo ʻia e Nanjing Tech University no ka pale ʻana i ka ʻaʻahu, ʻo 0.05mm wale nō ka poho ma hope o 1000 mau hola o ka ʻū ʻana me ke one -wai wai ʻakika ma ke kahe kahe o 5m/s (Pepa lining maʻamau 0.2mm), me ka laulā pale wela o -200 degere a 260 degere a me ke kaʻina alakaʻi honua.

Nā Manaʻo Hoʻohana: Hoʻohana ʻia i loko o nā paipu me nā mea pāpaʻi (e laʻa, nā paipu hoʻoheheʻe slurry mea kanu phosphate) a me ka hoʻoulu ʻana i nā ipu hao (e laʻa, nā ipu hoʻohuihui catalyst) e koi ana i ke kūpaʻa ʻaʻahu. Ua hāʻawi ia i nā hāʻina no Wengfu Group a me Juhua Co., Ltd., e hoʻolōʻihi ana i ke kaʻina hoʻololi o nā mea hana mai 6 mahina a 2 mau makahiki a mālama ʻia ma luna o 500,000 yuan i kēlā me kēia makahiki.

Nā huahana pale: ʻO ka pepa PTFE me ke kākoʻo lole aniani, ka pepa PTFE Kina me nā mea hana kākoʻo kiʻi aniani, nā mea hoʻolako, nā hale hana